Set outgoing cc value per parameter per track True: use bank 1–16 / program 1–16 to set active pattern.įalse: pattern 1–160 is activated with bank 1 / program 1–128 and bank 2 / program 1–32 Use the midi.json file found in content mode to customize the OP-Z midi configuration. Off: pattern 1–16 is activated with bank 1 / program 1–128 and bank 2 / program 1–32
On: use bank 1–16 / program 1–16 to set active pattern keep holding this combo and press the corresponding key as described in the table below to turn each individual setting on or off.Īny incoming midi on channel 1 is redirected to the currently active track
To access midi settings on the device, press and hold the two index buttons this is indicated by four green leds showing the current tempo when tempo button is held. Sending a midi timing clock to your OP-Z will automatically put it into external sync mode. the outgoing channel of each track can also be customized. the outgoing cc values of each parameter on each track can be assigned a custom control number.
Each of the OP-Z's 16 tracks can both send and receive midi.
